| | |
SERIES S BIPOD BR |  | Availibility: | | Ref: HARSBR BORE HEIGHT 6" - 9". MOST USEFUL FOR SHOOTING OFF THE BENCH. ROTATES TO EITHER SIDE FOR INSTANT LEVELING ON UNEVEN GROUND. | |
|
|
BIPOD ADAPTER #4 |  | Availibility: | | Ref: HAR4 UNIVERSAL ADAPTER REQUIRES 2" OF UNCLUTTERED BARREL FOR MOUNTING. | |
|
|
BIPOD ADAPTER #5 |  | Availibility: | | Ref: HAR5 FOR COLT AR-15 ROUND HANDGUARD WITHOUT ALTERATION. | |
|
|
BIPOD ADAPTER #6 |  | Availibility: | | Ref: HAR6 FOR EUROPEAN SIZE RAILS (3/8" ACROSS RAIL SLOTS) | |
|
|
BIPOD ADAPTER #6A |  | Availibility: | | Ref: HAR6A FOR RAILS ABOUT 5/16" ACROSS SLOT | |
|
|
#7A SPACER |  | Availibility: | | Ref: HAR7A RUBBER SPACER TO ALLOW MOUNTING OF BIPODS ON THIN FORENDS AND SCHNABEL FORENDS | |
|
|
#8 STUD |  | Availibility: | | Ref: HAR8 FOR REMINGTON XP100 PLASTIC STOCK, INCLUDES #7A SPACER. REQUIRES DRILLING. | |
|
|
BIPOD ADAPTER #9 |  | Availibility: | | Ref: HAR9 ALLOWS MOUNTING OF ANY HARRIS BIPOD ON FLAT BOTTOM STOCKS. | |
|
|
SERIES S BIPOD BRM |  | Availibility: | | Ref: HARSBRM BORE HEIGHT 6" - 9" W/LEG NOTCH. MOST USEFUL FOR SHOOTING OFF THE BENCH. ROTATES TO EITHER SIDE FOR INSTANT LEVELING ON UNEVEN GROUND. | |
|
|
SERIES S BIPOD 25C |  | Availibility: | | Ref: HARS25C EXTENDS 13 1.2"-27" WITH 3 PIECE LEGS. THE TALLEST OF THE BIPODS, IT IS SUITED FOR UNUSUALLY TALL OR HEAVY MEN. ROTATES TO EITHER SIDE FOR INSTANT LEVELING ON UNEVEN GROUND. | |
|
|
SERIES S BIPOD 25 |  | Availibility: | | Ref: HARS25 BORE HEIGHT 12"-25" WITH 3 PIECE LEGS. ALLOWS MORE LEEWAY IN SHOOTING AT AN ELEVATED TARGET. ROTATES TO EITHER SIDE FOR INSTANT LEVELING ON UNEVEN GROUND. | |
|
|
#2R FLANGE NUT |  | Availibility: | | Ref: HAR2R HAS RADIUSED FLANGE FOR MOUNTING TO WOOD FORE-ENDS UNDER MAGAZINES | |
|
|
SERIES S BIPOD LM |  | Availibility: | | Ref: HARSLM SEVEN HEIGHT SETTING S FROM 9" -13". ROTATES TO EITHER SIDE FOR INSTANT LEVELING ON UNEVEN GROUND. HINGED BASE HAS TENSION ADJUSTMENT AND BUFFER SPRINGS TO ELIMINATE TREMOR. | |
|
|
#2A FLANGE NUT |  | Availibility: | | Ref: HAR2A 5/8" ROUND HEAD FLANGE NUT WORKS WELL ON RUGER M77 RP MKII PLASTIC STOCK & OTHERS | |
|
|
SERIES S BIPOD L |  | Availibility: | | Ref: HARSL BORE HEIGHT 9"-13". FOR PRONE POSITION OR BENCHREST. ROTATES TO EITHER SIDE FOR INSTANT LEVELING ON UNEVEN GROUND. | |
|
|
BIPOD ADAPTER #14 |  | Availibility: | | Ref: HAR14 FOR RUGER MINI 14 & MINI 30'S STANDARD & RANCH | |
|
|
#2 FLANGE NUT |  | Availibility: | | Ref: HAR2 ALLOWS MOUNTING OF STUD ON HOLLOW PLASTIC FORENDS | |
|
|
SERIES 1A2 BIPOD 25 |  | Availibility: | | Ref: HAR1A225 BORE HEIGHT 12"-25" WITH 3 PIECE LEGS. ALLOWS MORE LEEWAY IN SHOOTING AT AN ELEVATED TARGET. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
SERIES 1A2 BIPOD 25C |  | Availibility: | | Ref: HAR1A225C EXTENDS 13 1.2"-27" WITH 3 PIECE LEGS. THE TALLEST OF THE BIPODS, IT IS SUITED FOR UNUSUALLY TALL OR HEAVY MEN. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
SERIES 1A2 BIPOD BR |  | Availibility: | | Ref: HAR1A2BR BORE HEIGHT 6" - 9". MOST USEFUL FOR SHOOTING OFF THE BENCH. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
SERIES 1A2 BIPOD BRM |  | Availibility: | | Ref: HAR1A2BRM BORE HEIGHT 6" - 9" W/LEG NOTCH. MOST USEFUL FOR SHOOTING OFF THE BENCH. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
SERIES 1A2 BIPOD L |  | Availibility: | | Ref: HAR1A2L BORE HEIGHT 9"-13". FOR PRONE POSITION OR BENCHREST. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
SERIES 1A2 BIPOD LM |  | Availibility: | | Ref: HAR1A2LM SEVEN HEIGHT SETTINGS FROM 9"-13". FOR PRONE POSITION OR BENCHREST. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
SERIES 1A2 BIPOD H |  | Availibility: | | Ref: HAR1A2H EXTENDS FROM 13 1/2"-23". FOR PRONE OR SITTING THIS IS SATISFACTORY FOR THOSE OF AVERAGE STATURE. HAS A LEVELING DEVICE TO COMPENSATE FOR OFF-CENTER SLING STUD. | |
|
|
BIPOD ADAPTER #3 |  | Availibility: | | Ref: HAR3 FOR REMINGTON SEMI AUTO RIFLES | |
|
